Dual Power Automatic Transfer Switch Cabinet
Internal Components
Power Guarantee: Continuously monitor voltage conditions of two power supplies, identify power anomalies such as power loss and phase failure, automatically complete power switching, and supply power to fire pumps without interruption to prevent shutdown of critical firefighting equipment.
Safety Protection: Equipped with mechanical and electrical interlocks to avoid short circuit caused by simultaneous closing of two power sources. Multi-level short-circuit and overload protection is provided for main circuit and control circuit.
Signal Feedback: Upload operating status and fault alarm signals in real time. Reserved linkage interfaces connect with fire control monitoring system to meet requirements of remote firefighting operation and supervision.
Product Advantages
Original Components: Main switches, control transformers and fuses adopt CHNT original parts with stable performance. Components withstand long standby status and sudden load impact, suitable for intermittent operation of firefighting equipment.
Standard Cabinet: Adopt red cold rolled steel cabinet specially for fire protection. Internal wiring is partitioned with separated strong and weak current cables. Cooling louver and door lock are equipped for convenient installation and regular maintenance.
Intelligent Control System: Built-in dedicated ATS controller supports adjustable switching delay parameters. Automatic and local manual operation modes are available to match power distribution standards of various construction projects.
Application Scenarios
Commercial Buildings: Applied to fire pump rooms of shopping malls, office buildings and hotels, ensuring stable power supply for sprinkler pumps and hydrant pumps.
Residential Projects: Support fire water supply system of high-rise residential buildings, complying with mandatory standards of dual power supply for fire loads in high-rise building codes.
Industrial Sites: Used in factories and logistics warehouses, providing uninterrupted dual power supply for fire water pumps and pressure stabilizing firefighting equipment.
GCS Type Fixed Low Voltage Complete Power Distribution Solution
Custom designed for high risk, 24 hour continuous production scenarios in the petrochemical industry, this system is modularly combined with incoming cabinets and multiple fixed feeder cabinets (covering cabinet numbers AA1to AA10). It covers the whole process including main power access, centralized power distribution and precise power supply for terminal loads, providing an integrated, high safety and uninterruptible low voltage power distribution solution for petrochemical plant production units, pump power systems, instrument automatic control, utility works and tank supporting facilities. It serves as the core power hub for stable operation of chemical industry.
System Composition
Incoming Cabinet: Serves as the main power inlet of the plant power distribution system. It receives electric energy from the upstream high voltage system, equipped with large capacity main circuit breakers and smart metering instruments, to realize main power on off control, energy metering, short circuit and overload protection, building the first safety line of power supply for the whole plant.
Fixed Feeder Cabinet: Multiple AA series cabinets are arranged in rows. Each cabinet integrates multiple independent fixed outgoing circuits, which precisely distribute electric energy to various loads such as chemical pumps, fan compressors, circulating water systems, instrument control cabinets and lighting systems, realizing zoned and graded power supply as well as independent load control.
Core Configuration
High quality Electrical Components: Equipped with Schneider circuit breakers by default, complying with petrochemical safety standards, resistant to voltage fluctuation and impact load.
Visual Operation Panel: Integrated with digital display meters and control buttons for centralized monitoring and management.
Standardized Wiring: Separated strong and weak electricity circuits with rigidly fixed components, suitable for heavy load operating conditions of chemical industry.
| Product Name |
GCS Type Fixed Low-Voltage Complete Power Distribution System |
| Applicable Industry |
Petrochemical, Chemical, Metallurgy, Electric Power, Large Industrial Workshops, etc. |
| Rated Voltage |
AC 380V |
| Rated Frequency |
50Hz |
| Rated Current of Main Busbar |
630A~6300A |
| Rated Short-Time Withstand Current (1s) |
30kA~80kA |
| Rated Peak Withstand Current |
63kA~176kA |
| Protection Level |
IP30 (Customizable IP40/IP54) |
| Core Component Brand |
First-tier Brands such as Schneider, Delixi, etc. |
| System Composition |
Incoming Cabinet, Fixed Feeder Cabinet, Frequency Conversion Control Cabinet, Metering Cabinet, etc. |
Q: Are you a manufacturer? If yes, where is your factory located?
Yes, we are a manufacturer.Our factory and headquarter are located in Fuzhou City, Fujian Province, China, about 60 minutes drive from Changle Airport and about 30 minutes drive from Fuzhou Railway Station.
Q: What can I buy from you?
Complete set of low voltage distribution cabinets, medium and high voltage switchgears,drawer cabinets, distribution boxes, capacitor compensation cabinet, ATS cabinets, generator synchronization panels, electrical control cabinet, explosion-proof cabinet,etc. We have 18 years of experience in the electrical automation industry, providing the most suitable power distribution solutions.
Q: How can I place an order with you?
You should first provide us with detailed technical specifications or SLD (single line diagram)or related drawings, etc. by email, WeChat, whatsapp, phone, etc.You can contact any of our sales staff for quotation and further communication at any time.
Q: How is the price of your distribution cabinet calculated?
The price of our distribution cabinet is determined comprehensively according to its specifications, configuration, quantity and other factors.Please contact our sales team for specific prices, and they will provide accurate quotations based on your specific needs.
Q: How long does it take to get a quotation? What is the lead time?
After receiving the detailed information, we will give you a quotation within 2 days. Generally speaking, it takes about 15 days for samples and about 25-30 days for mass production. The specific delivery time depends on the items and quantity of your order.
Q: What are your payment terms?
We accept any flexible and fast payment method. Irrevocable L/C at sight.Prepay 30% as deposit + 70% of the balance after goods are ready (support T/T, Paypal Apple Pay, Google Pay, Western Union, WeChat, etc.)
Q: If we want to visit your factory, can you book a good hotel near the factory and pick us up from the airport or train station?
No problem at all. If you need an invitation letter before coming to China, we can provide it to you.
Payment Guarantee
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Audited Supplier 
){kind=link}